Compact format
IB9065W
900 × 650 × 600 mm working area for a smaller workshop.
Working area900 × 650 × 600 mm
Best for: Smaller workshops and compact engine parts.
Request a quotation →Quotation within 24 hours
Slovak manufacturer of IRONBLAST machines
Clean surface.
Without dust.
We develop, manufacture and sell professional aquablasting machines for engine part restoration and industrial cleaning. Wet blasting without dispersing dry abrasive.
01
Real resultsWe test your part first.
02
Technical supportWe help you choose a configuration.
03
Service and partsSupport after machine delivery.
IRONBLAST PRO / EASYWAY
Choose a machine to suit your part size.
The largest part dimensions and available workshop space are what matter. We can advise on an IRONBLAST Pro model and a compressor for a complete configuration. The photo shows IB1010W and serves as an illustration for the other models.
Medium working area
For everyday operation
IB1010W
1000 × 1000 × 750 mm working area for everyday professional cleaning.
Working area1000 × 1000 × 750 mm
Best for: Regular professional operation and a wide range of parts.
Request a quotation →Quotation within 24 hours
For larger parts
IB1212W
1200 × 1200 × 900 mm working area for bulkier components.
Working area1200 × 1200 × 900 mm
Best for: Large, heavier components with greater space requirements.
Request a quotation →Quotation within 24 hours
EASYWAY / AIR SUPPLY
Choose a compressor by airflow.
Three models, two operating pressures. Open a card to view details and switch models without leaving the page. The photo shows J11CTG and serves as an illustration for the other models.
Compressed air supply
J11CTG
Compact compressed air supply with an 11 kW motor, integrated refrigerated dryer, filtration and a 400-litre air receiver.
Documented air flowOperating pressure8 barAir flow1.6 m³/minOperating pressure10 barAir flow1.4 m³/minAir receiver 400 l
Best for: Complete treated compressed air supply for a workshop.
Request a quotation →Quotation within 24 hours
Compressed air supply
J15CTG
EasyWay compressor with a 15 kW motor and documented airflow of 2.6 m³/min at 8 bar.
Documented air flowOperating pressure8 barAir flow2.6 m³/minOperating pressure10 barAir flow2.0 m³/minAir receiver 400 l
Best for: Compressed air supply for systems requiring up to 2.6 m³/min at 8 bar.
Request a quotation →Quotation within 24 hours
Compressed air supply
J22CTG
EasyWay compressor with a 22 kW motor and documented airflow of 3.6 m³/min at 8 bar.
Documented air flowOperating pressure8 barAir flow3.6 m³/minOperating pressure10 barAir flow3.0 m³/minAir receiver 400 l
Best for: Compressed air supply for systems requiring up to 3.6 m³/min at 8 bar.
Request a quotation →Quotation within 24 hours
Custom order approximately 1 - 3 months; Availability and delivery date are confirmed in the quotation.In-stock items within 5 working days.
Unsure which model to choose? We will help you select one for your parts and workshop.Get help choosing / 3 questions →Compare working areas and specifications →
Preliminary selection / 3 questions
Which IRONBLAST best suits your workshop?
The result uses only the documented working area, load capacity and air consumption. We confirm the final selection based on the part and loading method.
Actual results
See the difference on the part.
Real components before and after wet blasting, from our existing work gallery.
Before
AfterEngine starterMetal engine part
Removal of corrosion and service contamination
Before
AfterOil pumpEngine component
Deposits and contamination
Before
AfterTiming coverAluminium part
Grease and oxidationResults depend on the material, abrasive, pressure and the part's initial condition.
Test your own part →Quick comparison
Three working areas. Three operating requirements.
Start with the largest part you need to load into the chamber. These values come from the technical datasheets for each model.
Working areas at the same scale
The first two working area dimensions are shown at the same scale; the third is listed below each model.
IB9065W900 × 650 mm3rd dimension 600 mmIB1010W1000 × 1000 mm3rd dimension 750 mmIB1212W1200 × 1200 mm3rd dimension 900 mm
The diagram shows the working area, not the entry doors or confirmation that a specific part will fit. Door dimensions are in the table below.
| Model | Price | Working area | Machine dimensions | Entry doors | Weight | Air | Documents |
|---|---|---|---|---|---|---|---|
| IB9065W | 9 000 € excl. VAT | 900 × 650 × 600 mm | 900 × 1050 × 1850 mm | 700 × 550 mm | approx. 380 kg | approx. 1.1 m³/min at 6 bar | Technical datasheet ↓ |
| IB1010W | 10 500 € excl. VAT | 1000 × 1000 × 750 mm | 1000 × 1400 × 2100 mm | 830 × 650 mm | approx. 500 kg | approx. 1.5 m³/min at 6 bar | Technical datasheet ↓ |
| IB1212W | 11 500 € excl. VAT | 1200 × 1200 × 900 mm | 1200 × 1600 × 2200 mm | 900 × 700 mm | approx. 650 kg | approx. 2.2 m³/min at 6 bar | Technical datasheet ↓ |
IB9065W9 000 € excl. VAT
- Working area
- 900 × 650 × 600 mm
- Machine dimensions
- 900 × 1050 × 1850 mm
- Doors / weight
- 700 × 550 mm / approx. 380 kg
- Air
- approx. 1.1 m³/min at 6 bar
IB1010W10 500 € excl. VAT
- Working area
- 1000 × 1000 × 750 mm
- Machine dimensions
- 1000 × 1400 × 2100 mm
- Doors / weight
- 830 × 650 mm / approx. 500 kg
- Air
- approx. 1.5 m³/min at 6 bar
IB1212W11 500 € excl. VAT
- Working area
- 1200 × 1200 × 900 mm
- Machine dimensions
- 1200 × 1600 × 2200 mm
- Doors / weight
- 900 × 700 mm / approx. 650 kg
- Air
- approx. 2.2 m³/min at 6 bar
Compressor selection: The air supply must cover the specific machine's consumption and operating reserve.View J11CTG →
A machine you can inspect
See beyond the catalogue.
You can inspect IRONBLAST in a working workshop. We will show you the controls, working chamber and details that matter in everyday operation.
Interactive 3D viewLoads only when you press the button.
Interactive view · IB1010W
See the machine from every angle.
Rotate and zoom the machine and open its side doors. Explore the construction and access to the IB1010W working chamber before a visit.
Drag to rotate. Use the scroll wheel or a gesture to zoom.
Illustrative view. For presenting the machine; it does not replace checking part dimensions, installation requirements or safety clearances.
From selection to service
Support before and after delivery.
We help with configuration selection, air requirements and subsequent operation. Machine delivery and operator training are confirmed in the current quotation.
Technical advice
Machine, compressor and configuration suited to your parts and operation.
Delivery and training
As agreed in the quotation, we arrange machine delivery, setup, safe operation guidance and basic training.
Warranty, service and parts
12-month warranty excluding wear parts, service after the warranty period and spare parts under the quotation terms.
Test on your part
First the result. Then the decision.
Arrange a cleaning test on a part you work with. Before shipping, we will confirm the part's suitability and the test conditions together.
Free cleaningTest of a suitable part by prior arrangement.
Maximum 10 kgMaximum part dimensions 400 × 250 × 150 mm.
Normally within 3 daysWe confirm the timing before you ship the part.
ShippingThe customer pays shipping both ways. On machine purchase, we deduct it from the machine price.
We agree on a suitable part and delivery method.
We check the material, contamination and expected result.
We use the result to select a suitable machine and configuration.
Practical answers
What to know before choosing a machine.
Air requirements, suitable materials, test cleaning and delivery terms in one place.
Another question? Write to us →What is aquablasting and how does it work?
Aquablasting, or wet blasting, cleans surfaces with a mixture of water and abrasive media. Water reduces dust, cools the surface and helps produce a fine, even finish.
Which materials can be cleaned?
We commonly process aluminium, steel, stainless steel, brass, cast iron and selected plastics. The right process depends on the material, contamination and required finish, so we recommend testing the actual part first.
Which compressor does an IRONBLAST machine need?
Requirements depend on the model: approximately 1.1 m³/min for IB9065W, 1.5 m³/min for IB1010W and 2.2 m³/min for IB1212W, all at 6 bar. We select the compressor based on the machine's documented air consumption and the required operating reserve.
What is the difference between 8 and 10 bar on the J11CTG compressor?
Documented airflow is 1.6 m³/min at 8 bar and 1.4 m³/min at 10 bar. Higher pressure therefore means lower airflow. Suitability for a particular machine must be checked against delivered airflow, filters, pipework and operating reserve.
Which abrasive media are used?
IRONBLAST machines support glass-ceramic beads, crushed plastic and sand. Other abrasives are available on request once we have assessed the part material, contamination and required surface finish.
Are delivery and operator training included in the machine price?
We confirm machine delivery and operator training in the current quotation for the specific configuration and delivery location. Before delivery, we check the space, electrical connection and compressed air supply with you.
How does the free part test work?
By prior arrangement, you can send a part weighing up to 10 kg and measuring up to 400 × 250 × 150 mm. We normally process it within three days. The customer pays shipping both ways; if a machine is subsequently purchased, this shipping cost is deducted from the machine price.
What warranty and service support do you provide?
IRONBLAST machines carry a 12-month warranty excluding normal wear parts. We also provide service after the warranty period, technical support and spare parts under the terms of the specific quotation.
Which model should I choose?
Start with the dimensions of the largest part you need to load into the chamber. We then consider the entry doors, load capacity, workshop space and available compressed air. Send us a photo and the part dimensions and we will recommend a suitable model.
Choose a machine for your part →Help with selection
Let's choose the right configuration.
Tell us which parts you clean and which compressor you have. We will recommend a suitable model and configuration.
Phone+421 952 001 917
Emailinfo@aquablasting.eu
Registered office, manufacturing and serviceBrezová 107/98, 076 12 Brezina, Slovakia
Company details
Company registration number (IČO)55344917
Tax ID (DIČ)2121954208
VAT ID (IČ DPH)SK2121954208